Power supply for production lines
Stable operation under steady load in industrial environments.
Product philosophy
One platform. Three power ranges.
ENERVA generator sets are available in three power configurations: 160 kW, 260 kW and 320 kW. The 260 kW and 320 kW models share a common structural platform, simplifying service logistics and component standardisation. The 160 kW version is a compact configuration from the same industrial product line for medium-scale technical installations.
Standardisation
The shared enclosure for the 260 kW and 320 kW versions simplifies servicing and preserves build repeatability.
Quality control
Focusing on three power ranges helps maintain operational predictability and full production control.
Industrial construction
Design and construction
Industrial-class sound-attenuated enclosure
Reinforced enclosure designed for operation both inside production halls and outdoors at industrial facilities.
Industrial 1500 rpm engine
Six-cylinder heavy-duty engines optimised for stable performance under steady load.
Four-pole alternator and fuel tank up to 640 l
Stable voltage characteristics, 0.8 power factor and extended runtime autonomy in the 260/320 kW versions.
Prepared for ATS integration
Capable of operating as a backup or prime source, including grid synchronisation and integration with energy-management systems.
Mobile version
Mobile power configuration
ENERVA generator sets are available in a mobile version integrated with a homologated twin-axle trailer. This solution allows rapid relocation of the power source between facilities, support for temporary projects and infrastructure coverage during modernisation and expansion.
Mobility does not compromise operating parameters. The units retain full industrial functionality, including continuous duty and cooperation with facility automation.
Typical applications
Platform applications
Power reserve for plants
Automatic infrastructure support in the event of grid failure.
Energy upgrades
Continuity support during installation expansion and technology changes.
Project power supply
Temporary power source for investments and installation work carried out outside permanent infrastructure.
Power range
All units operate in PRP mode in accordance with ISO 8528
ENERVA 160
160 kW prime power
Compact enclosure, 469 l fuel tank, intended for medium-scale technical installations and backup sources.
ENERVA 260
260 kW prime power
Shared platform with the 320 version, 640 l tank, continuous operation in demanding industrial environments.
ENERVA 320
320 kW prime power
Higher power reserve, heavy-duty construction and readiness for integration with EMS/BMS systems.
Technical materials in preparation.
The full technical specification will be available soon.
Technical parameters
Platform for continuous duty in industrial standard
Standard electrical parameters
Rated voltage 400 V, frequency 50 Hz, power factor cos fi 0.8, four-pole alternator with H insulation class, IP23 protection rating and a 4-pole main circuit breaker.
Operating conditions and emissions
The units comply with current EU Stage V emission standards and remain prepared for operation in ambient temperatures from -25°C to +40°C.
Control
Control and integration system
ENERVA generator sets are equipped with an industrial control module enabling prime and standby operation, cooperation with ATS, grid synchronisation and parallel operation of multiple units.
Integration
Prepared for facility operation
The platform remains ready for ongoing monitoring of operating parameters and protections, as well as integration with EMS/BMS systems in the facility.
Operation
Operating economics
The units achieve their highest operating efficiency at 75-80% of rated load, corresponding to optimum fuel consumption in industrial applications.
Autonomy
Predictable runtime
At 75% load, the 260 kW version reaches approximately 14-15 hours of autonomy and the 320 kW version approximately 11-12 hours, enabling extended operation without refuelling.
Short specification
Technical platform table
| Parameter | ENERVA 160 | ENERVA 260 | ENERVA 320 |
|---|---|---|---|
| Prime power (PRP) | 160 kW | 260 kW | 320 kW |
| Alternator power | 200 kVA | 325 kVA | 400 kVA |
| Rated voltage | 400 V | 400 V | 400 V |
| Voltage configuration | 3-phase 400/230 V | 3-phase 400/230 V | 3-phase 400/230 V |
| Frequency | 50 Hz | 50 Hz | 50 Hz |
| Power factor | 0,8 | 0,8 | 0,8 |
| Rated current | ~288 A | ~463 A | ~500 A |
| Engine | 1500 rpm, 6-cyl. | 1500 rpm, 6-cyl. | 1500 rpm, 6-cyl. heavy-duty |
| Fuel tank | 469 l | 640 l | 640 l |
| Fuel consumption at 75% | ~35 l/h | 42-45 l/h | 50-55 l/h |
| Fuel consumption at 100% | ~45 l/h | 55-60 l/h | 65-72 l/h |
| Autonomy at 75% | ~13 h | 14-15 h | 11-12 h |
| Emission standard | EU Stage V | EU Stage V | EU Stage V |
Summary
Focused range of industrial generator sets
ENERVA builds its offer around three power ranges to maintain quality control, component standardisation and operational predictability. It is a solution for facilities that expect stability, repeatable operating parameters and simplified service handling.